Re: Physician 1127 popup Kan-o-Tuna
With christmass coming i did not have alot of time for the bike.. i mainly checked clearance and plan chassis mods.
Basicly, the rear lower mount need to move outward to center the engine.
The tank need to come up 1/2 an inch so the side panel may need to be extand to match. Fuel valve sit in the new carb location so i'll have to come with a plan.
The front fairing will need to be moved up the same but since it was touching the wheel on big bumps it will be wellcome.
So step 1 for the xmass holiday is to have all mounts tacked in their place and the zx12 swingarm back in to check chain alligment and exhaust routing.
Pauverty leading to ingenuity
Cafe/oldschool bike build