Removed the throttle bodies and sheared off one of the air funnel hold down screws,
must remember to drill and retap it.
One of the throttle cables was not returning, turned out it was rusted and broken, with a section still remaining in the housing, picked up two used ones.
Xmas came early with some Ebay special grips and bar end indicators, the now painted top triple, already had the handlebars, will require some drilling for control bungs and cabling.
Hey Speedy, imitation is the sincerest form of flattery....thanks
I did make some brackets for the oil cooler and rubber bushes for the radiator.
Shout out to Dicko for his welding of new the oil cooler to AN fittings......thankyou.
Q.What could these be for?
And now back to the paint stripper and degreaser, subframe undertail still on hold.