Custom Fighters - Custom Streetfighter Motorcycle Forum banner

september fotm entry thread

7K views 7 replies 8 participants last post by  Holmes 
#1 ·
Include 4-8 pics. Decent lighting and resolution.
List the mods and any info about the bike.
Note the pic you would like to be used for voting.
Include a name for the bike, if you want.

It must be your bike, and you must have at least 50 posts.

Voting goes up on the 21st, or as close as I can get to the 21st.

All non entry posts, and posts that do not meet the requirements will be deleted.
 
#3 ·
Here is my entry.Had the bike since 2001 been an ongoing process of mods since then.
List of mods :
Frame powdercoated.
05 gsxr 1000 forks ,triples and front wheel.
R6 calipers.
07 gsxr 750 rear wheel.
02 gsxr 1000 rear caliper.
Fox rear shock revalved and resprung.
Jmc 6 inch over swingarm.
Galfer wave discs.
Ohlins steering damper.
Yanishiki rearsets.
07 gsxr 750 subframe and tail.
Carbon fibre front fender and tail side panels.
Fat bars and pazzo levers.
Acewell speedo.
Engine:
1216 cc mtc turbo spec pistons.
Ported head ,ape valve springs.
Ape studs ,nuts and cam tensioner.
Stock cams.
Gsxr 1100 coil spring clutch and lock up.
FBM turbo kit with TD04 turbo.
Dyna 2000 and mini coils.
That's the main stuff lots of little details not included!!Not much of the original bike left.











Please use third from last photo for voting.Thanks.
 
#5 ·
Well September needs some competition so.....looks like it will be a bodywork vs. motor month. Wish me luck! My competition is tough. Cheers guys! :bigred:

Link to my build:
http://www.customfighters.com/forums/showthread.php?t=82617&page=10

2000 :honda: CBR 929rr
Buell XB12 front fender
Hand fabricated metal tail section, fork covers, headlight shroud, fairing covers, speedo and misc bracketry
CNC'ed my own side mirrors
Honda Civic 8" x 18" rear wheel with 240mm tire
VFR800 single side swing arm
Projection beam headlights
Fabbed dual exhaust
Raised handlebars
LED blinkers and lights
Super Chevy RED paint
Air box and exhaust servo mod

(Voting pic 1st one)














 
#6 ·
Vmax Turbo......... Taz.... :)

GTS1000 HCS front end grafted in
one off yokes linked to steering with BMW linkage
T28 turbo with one off stainless pipes and plenum
Home made fuel tank
GSXR1000 tail and subframe (slightly modded)
Heavily modded GL1800 swingarm used upside down
VFR1200 rear wheel
Bandit 1200 shock with one off linkage
one off radiator
etc etc etc :)








Project thread here....... http://www.customfighters.com/forums/showthread.php?p=2286850#post2286850

Cheers

Steve
 
#7 ·
You know I'll throw my beast in the ring. She's come a long way since Sept. 2013. Here we go:

2002 Kawasaki Ninja ZX-6R

Mod List:
Frame, swingarm, tail, headers, and engine covers painted black
2000 ZX-12R forks, rotors, and triples
-Ignition arms cut to use steering lock
-Calipers painted and spaced in for rotors
2005 ZX-6R Front Fender
Fork Brackets
2003 Z1000 headlight
-Fairing stay cut to fit
-Custom fitted H6M bulb
-Brackets for speedometer
Standard Bar End mirrors
ZX-R Bar Ends
Orbital Ninja Grips
Brackets for brake reservoirs
Full 2009 ZX-6R subframe and tail
-2013 ZX-6R front seat
-Custom adapter plates
-Gas tank bracket
-Seat cowl
JT Racing 530 Chain and Sprockets
2003 ZX-6R front footpegs
2005 ZX-6R coolant reservoir
Fender Eliminator
Chopped Yoshimura RS-3 Exhaust
Custom exhaust bracket
Stainless Steel bolts everywhere
Stickers for extra horsepower :LolLolLolLol:

On to the pics:





Please use first pic. Thanks :rock:
 
#8 ·
Bike Name Mongrel (A Bit of Everything)

Picture 1 for voting please

Frame & Engine
1984 GPZ900R Engine
1991 Frame
Complete Re Build
Bottom End Main Bearings
New Rings
Top End Bearings
New Clutch Cush Rubbers
ZZR1100 Starter Clutch
ZZR1100 Oil pump
Modified Camshaft Oil Feeds
New Gasket Set
Engine Re painted heat resistant Black.
Clutch, Timing Cover, Water Pipes and Oil Pipes Powder coated Candy Apple Green
Titanium Domed Cap head Engine Bolt Complete Kit
Self Machined Rear set mounting plates, for Rear Brake
Self Machined Offset Cover Plate for Clutch slave cylinder and Gear Shift Unit
Kawasaki ZXR750 Radiator Pipes cut off and re welded at different angles
Modified Radiator and Oil Cooler Brackets
Self-Made Coolant Reserve Tan
Silicone Braided Water hoses
GPZ900R Oil Cooler and Fittings
Carburettors Mikuni FCR 36 4 Pod Filters
Swing-arm Complete VFR800 Stripped and re built with new seals and bearings
Dog Legs Suzuki Hayabusa
Modified R1 Rear Sub frame modified and strengthened to mount using Original mounting holes of GPZ900 Frame.
Strengthen struts welded onto framed to allow mounting of CBR 952 Rear shock
4 into 1 System adapted to take Delkevick GP Pipe
Rear Wheel Honda Civic Alloy Car 18” 100 PCD running on 37 mm Offset Billet Adapter Self Machined
Front Wheel - Aprillia Mille 17” & Mille Spindle and spacers
New Front Bearings and seals
Front Tyre Metzler ME880 120 x 70 R17” 58 V
Rear Tyre Metzler ME 880 240 x 40 x VR18” 79V
Rear Suspension Honda CBR 952 Rear Gas Shock
Front Suspension Ducati 996 Forks & Yokes Modified to take original GPZ Steering Stem.
New Head Bearings Kit includes Seals (GPZ900)
Chain AFAM Green Race Chain extra long with VFR 800 Rear Titanium Sprocket Standard Tooth
Kawasaki ZZ100 Front 17 Tooth Sprocket
Front Calipers - Brembo Powder Coated White
Aprillia Front Discs Centres Stripped and Sprayed Black
Rear Caliper Honda VFR 800 adapted to bypass ABS.
New Pads all-around.



Venhill Braided Power Hose’s
Front Nose Cone Fairing - Gilera 125 Runner Three Piece Fairing modified to Fit
Honda 600 Hornet Tank With Blanked off and modified position for fuel Tap.
R1 Complete Race Tail End
Front Mudguard Ducati 996
Rear Set Replica ZX10R
Rizoma Flat Wide Bars
Rizoma Bar Risers
Rizoma Lux Handlebar Grips Throttle modified to take push pull unit
Rizoma Brake Fluid Reservoir
Rizoma Clutch Fluid Reservoir
Rizoma Brake Fluid Bracket
Rizoma Clutch Fluid Bracket
Taylor Brake & Clutch Fitting for Rizoma Brackets
Brembo HPS Radial RCS 18/20 Brake unit
Brembo HPS Radial RCS 18/20 Clutch Unit
Venhill Hydraulic Clutch Hoses & Banjos
Rizoma Rear all in one Master Cylinder
Venhill Push Pull Twin Throttle
Motobatt Battery
New GPZ900 Wiring Loom Modified where required
Dyna Coils Taylor Leads
Kosso RX2 GP Style Meter
Venhill Left and right handle Bar switch units
Front Headlight Gillera 125 Runner Modified to take LED Front Lamp Conversion and LED indicators
Tail Light all in One R1 Led tail light with Built in Indicators
Ducati 996 Front Fender

Paintwork Gloss Black with two Apple candy Metallic Green Stripes







 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top