Eeeeeeeeee FE

[370steve]

yes mate they make a few from 5" through to 6.5"

but nowhere do they tell what the sprocket offset is, every thing else will be standard

ie - 6" rim, 28mm spindle bearing, stock disc off set, but as i am not wanting to fit it to a Busa with stock sprocket off set i need to know what stock is, so i can deside wether to go ahead with BSD rear or get a Dymag five spoke

[Junkie]

What measurements do you need? I can probably measure something on my wheels. You need sprocket offset from the swingarm, or what?

[370steve]

Originally Posted by Junkie

What measurements do you need?

center line of wheel to sprocket seat face is the main measurement i am after at the moment

[370steve]

right, i have been sat thinking about it and it is workable, with a sprocket adapter ring and a custom sprocket i can reduce the hyabusa stock sprocket offset of 118mm down to the 112mm offset i require, will mean a bit of sketching, measuring, talking to Taff, bit of trial and error, but in my warped mind it is a go er

[370steve]

Just had reply to my latest e-mail to Ben at HPS, he has answered my questions this time, sent me a Pdf of the wheel dimentions of the Hyabusa Gen 1, and said i can order a miss match "pair" of wheels.

sprocket off set looks to be spot on for my fitment.

So BST five spoke carbons look to be a go.

[370steve]

Have had a great chat with Mick Gardner Racing, and looks like they will have no probs making me a Bespoke Ohlins

rear shock.

I could just get a CB1000R shock off the shelf, but i am wanting the piggy back gas res with hi/low comp damping, length adjustable and different

top/bottom mountings.

should look something like this (but with extras)

[370steve]

Yoshi TMR-MJN's have cleared Customs, VAT+ import duty payed, should be delivered tomorrow**

[370steve]

pile of bits gets bigger by the week

[370steve]

There should be a law that stops access to Webike Japan during boring work mornings!!!!

Just found these sexy must have in my life*bits of Mikuni loveliness for both my sets of TMR's*

Dam you webike :Bang

[370steve]

whilst at Stu's getting the GS dyno'd, i remembered he still had my Dot head, he has re cut the valve seats and lapped the valves in.

so head is ready to go onto the bandit lump, going into the EFE. still need some cams, but will probably go for some after market ones, Kent, Yoshi etc etc

just need to pay Stu for the work haha.