|
Dirty Tards & Minis Everything about dirtbikes, motards and minis goes in here! |
![]() |
|
Thread Tools |
![]() |
#1 |
hooligan quads
![]() CF Addict ![]() |
![]()
Last year a mate dropped of a very abused (used) ATC 70. I may have posted but can find it if I did. This was given to us to do as we wanted, but mainly for my daughter to cut her teeth on. We started stripping it back last year but she lost a bit of drive.
This weekend I didn't have much on so we dragged it in the work shop and I got to work. Stripped it completely to the frame. Then I borrowed a mates blasting cabinet and shot blasted most of the bits that would fit. I then cleaned and sanded what wouldn't. Now it sat mocked up ready for the next phase. The plan is one of two Restore it.. Or make a drift trike. That will involve fitting a pit bike front end, go-cart rear wheels and a 140cc put bike engine. Time to have a think ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Sent from my LYA-L29 using Tapatalk |
![]() |
![]() |
Advertisement | |
These advertisements only appear for guests, register now for free to remove these ads! |
Sponsored Links | |||
Advertisement
|
|
![]() |
#2 |
GURU
![]() CF Addict ![]()
Local Time: 01:32 PM
Location: La Linea
Posts: 2,182
Flip Offs: 24
Flipped Off 24 Times in 14 Posts
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Drift trike would mean finding a place to use it with tarmac but no security.
Get it working again and rag it round the fields. Ykims Aaron, living in Gibraltar and riding a 2014 MSX125 (Grom) with a bunch of shiny shite on it. Slow n loud! ![]() |
![]() |
![]() |
This user High Fived a_morti! |
![]() |
#3 | |
hooligan quads
![]() CF Addict ![]() |
![]() Quote:
Sent from my LYA-L29 using Tapatalk |
|
![]() |
![]() |
This user High Fived titan! |
|
|
![]() |
#4 |
Is my bike ok?
![]() ![]() ![]() |
![]()
You been mass producing knucks over there?
![]() I dunno what to do with something like that, but I'm in! |
![]() |
![]() |
This user High Fived shinyribs! |
![]() |
#5 | |
hooligan quads
![]() CF Addict ![]() |
![]() Quote:
Thinking about it today I may use the engine. It's not the original ATC 70 which would be worth quite a bit. Not only that I think sticking a 140cc engine might be too much for the kids. Anyway I tore it apart. I need to replace the kicker, all gaskets, and give it a good clean but generally it all looks good. So if nothing else will do for now. ![]() ![]() ![]() ![]() ![]() ![]() ![]() Sent from my LYA-L29 using Tapatalk |
|
![]() |
![]() |
This user High Fived titan! |
![]() |
#6 |
hooligan quads
![]() CF Addict ![]() |
![]()
Inspiration pic
![]() Sent from my LYA-L29 using Tapatalk |
![]() |
![]() |
![]() |
#8 |
re-tarded
CF Addict
|
![]()
You could always make a throttle stop for the big engine
A steering damper dampens steering oscillations. If it starts to leak, it may become a steering dampener. There's no such thing as a dampner. Bikes: naked SV1000 with all the possible bling, FE570, FS570, 450XCF SM trackbike |
![]() |
![]() |
This user High Fived Junkie! |
![]() |
#9 |
hooligan quads
![]() CF Addict ![]() |
![]()
Today I grabbed a Chinese bike a mate had sat in his garage. It has the same style clone engine but 110cc so that will do. It does have extra bits too only issue is the carbs won't fit so first snag to work out.
The C70 engine is stripped and cleaned it needs a few parts of I'm going to use it later on. ![]() ![]() ![]() ![]() ![]() ![]() ![]() Sent from my LYA-L29 using Tapatalk |
![]() |
![]() |
![]() |
#10 |
hooligan quads
![]() CF Addict ![]() |
![]()
So this weekend I fitted that engine, then took it out again because the carb wouldn't fit with the electric starter. Then sold the bike to be told you can buy a £3 adapter plate to swivel the carb. So I made the seat. I know we don't do chequer plate round here but what else am I gonna use it for ???
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Sent from my LYA-L29 using Tapatalk |
![]() |
![]() |
![]() |
|
Bookmarks |
Thread Tools | |
|