Custom Fighters - Custom Streetfighter Motorcycle Forum banner

636

  1. Member Project Bikes
    Okay, so I'm normally a car guy....Bimmer to be specific but I needed a project for the winter. Since I told my buddy last summer we were gonna do bikes this year I felt no better time that the present to make that my project. So I began looking, it only took about 2hrs before I found it on...
  2. Streetfighter Help Needed!
    Hello everybody, I'm 18 years old and I am studying in mechanical engineering. Here's my winter project: I have a 95' ZX7 and a 05' 636 in pieces. I want to fit the complete front of the 636 on the ZX7 (forks, front wheel, brakes). I also want to change the ZX7 rear wheel for the 636 rear...
  3. Member Project Bikes
    Hello everybody, I'm 18 years old and I am studying in mechanical engineering. Here's my winter project: I have a 95' ZX7 and a 05' 636 in pieces. I want to fit the complete front of the 636 on the ZX7 (forks, front wheel, brakes). I also want to change the ZX7 rear wheel for the 636 rear...
  4. Streetfighter Help Needed!
    I have an 04 XZ6R that is now naked, severed the ignition wires and blew the main fuse, replaced and re-spliced. Now it will crank but won't fire. Fuel pump is good, all relays, fuses and ECU are ok. The ECU is sending out the signals but there is no spark. Pulled a coil stack and grounded it...
  5. Beginner Streetfighter Questions
    Hi, Im building a fighter out of my EX500 (GPZ500s) and I have put a swingarm from a 636 on it. My question is : Can I fit a rear zx6r wheel to the 636 swingarm or is there much modding involved? (The 636 wheel is allot more expensive than the zx6r but looks the same) Any help would be greatly...
Top