Custom Fighters - Custom Streetfighter Motorcycle Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Archived Classifeds
    Here goes a long shot! I am currently modding my little bike (1997 TU250x) and the braking system is shot. I got a new (to me) 2008 Yamaha FZ6 master cylinder (brembo unit) and I would like to pair it with a brembo caliper from an older Ducati model (not radial calipers) - i need the left side...
  2. Archived Classifeds
    I need to make room in my garage for my negligent landlord to let his completely aloof handyman try to take down my whole house from below, so here I am selling things: 5-3/4" Round Headlight with Clear Lens. Autopal Brand. Bulb or Two Included $20+Shipping R6 Calipers These should fit at...
  3. Archived Classifeds
    I have a set of front Calipers and Rotors from a 2003 or 2004 R6. These will likely fit alot of other things, I'm not up on modern sportbikes. These are in excellent condition. I can get a bunch of measurements for you if you need them. $80 + shipping
  4. Streetfighter Help Needed!
    I'm in the midst of a front brake upgrade on my 83 Kawi 550. I purchased a set of rotors and calipers based on the rotor fitting on my front wheel. I ended up getting a set of the 03-04 r6 rotors and calipers. The calipers are the 4 piston 'blue dot' calipers used on a bunch of Yamahas. What...
  5. Brakes and Suspension
    So I go to bleed my brakes and can't for the life of me get the bleeder loose: I Soaked the hell out of it with liquid wrench, WD or whatever for a good long time I have a proper 6 point wrench for it then resorted to vice grips since I'm going to replace it anyways, hitting the caliper harder...
1-5 of 5 Results