Custom Fighters - Custom Streetfighter Motorcycle Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Making Power
    Yo how do I upgrade my carburetor for yamaha rx 135 4-speed....I kinda have troubles identifying parts for it. Does anyone know how to get them in India?
  2. General Streetfighter Discussion
    I just got some Mikuni flat slides in to fit on my 1980 cb750F. BUT, of course they are bigger and spaced different. So I'm making my own out of radiator hose, and its much more complicated than I thought. Maybe I made the wrong decision. Anybody know of any threads that show somebody doing...
  3. Streetfighter Help Needed!
    Although I haven't had major problems so far, I've never touched my carbs, let alone know what the main/pilot jets are etc. The main concern is that getting the bike started after it sat for a week or so (I ride mostly on weekends), it's always difficult to get the bike to crank over. I can't...
  4. Streetfighter Help Needed!
    on the way back from FF i noticed my bike breaking up alot and when id stop it high idle and when id pull away it would chug almost to the point of stalling unless i ripped on it , noticed my airbox was dripping , opened my box and theirs an inch of fuel and all my vacuum line seemed to be tight...
  5. Streetfighter Help Needed!
    ok so i have been working on my 93 gsxr1100 and im comeing close to the end and now im running into some issues battery does not fit anymore in chopped tail has anyone ever used the battery pack idea? how did it work out? bike will idle with the choke on but as soon as i take the choke off or...
  6. Streetfighter Help Needed!
    i know the 2 fuel lines on the bottom of the carbs go to the petcock what do i connect to the 2 vacume nipples above the fuel nipples on the carbs? and wheres the vacum line on the petcock go to? itd be great if someone could explain whats up, thanks
1-6 of 6 Results