Custom Fighters - Custom Streetfighter Motorcycle Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
I have been working on this bike for a while. Had to rev it to 3k and dump the clutch to take off. Figured out it was worn emultion tubes. Pulled them and the main jets then proceeded to lose them. Ordered new ones I don't know what size was in there but I now have 105 main jets. The bike will start but now runs worse than ever. Pilot screws were three turns out choke half way out engine would come up to 4k I could rev it but response was sluggish and running very rich. If I tried to take the choke off it would die. Just tried 1-1/2 turns out. Would start if choke all the way on and stay at 1k if I give it throttle it dies out. I can't find any specs on the water cooled 600. Any help would be great. Going to try 2 turns out tomorrow.


Sent from Motorcycle.com Free App
 

·
Registered
Joined
·
4,653 Posts
1 - 5 of 5 Posts
Top