Custom Fighters - Custom Streetfighter Motorcycle Forum banner
1 - 2 of 2 Posts

·
Thudarcat Rider
Joined
·
229 Posts
Hi there. Fellow thundercat rider here.

Check out this post. http://www.yzf600r-usa.com/phpBB2/viewtopic.php?f=24&t=51399&start=20

and this post

http://www.yzf600r.com/phpBB2/viewtopic.php?f=24&t=69289&p=802033&hilit=+airbox+mod+#p802033

I'm on this forum as well. They have great advice for our bikes. I've had by cat fightered for years, but now I'm having a different problem/ But the aforementioned link should help you. Also, your bike is not a CA model being that year. If you were you would notice a big ugly smog cage around your exhaust headers and oil filter.
 

·
Thudarcat Rider
Joined
·
229 Posts
You need the inline filter. Keep it. I think it was just out of the photo or buried. But, either way, keep it. You only want clean air, and gas in your engine.

The tube (aprox 1 inch diameter) that runs through the frame into your fairing stay should be rerouted up into the air box. What you did in your image is perfect. Just what I did too. Cut a small whole in the center of your air box right at the spine running from front to back, and put the hose right against the filter once inserted. It will stay with pressure unless you cut the hole too big. If you did, find a connector that will pressure fit the hose to the air box.
 
1 - 2 of 2 Posts
Top