Custom Fighters - Custom Streetfighter Motorcycle Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
299 Posts
You've got two planes that the crack goes through, the surface going to the cover and the outside of the casing; I would try some jb weld on the non-mating surface and put a dab of rtv in the mating surface when you go to zip it up for a quick fix. It might could be welded back up but you could have a problem with the mating surface being unlevel but it could probably be lightly dremelled/sanded back into a sealable shape
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top