Custom Fighters - Custom Streetfighter Motorcycle Forum banner
1 - 5 of 5 Posts

·
Blood,Sweat N Beers
Joined
·
897 Posts
Discussion Starter · #1 ·
OK guys well I started working on my bike again I was trying to fit the GSXR 1000 swinger to the frame of my katanaand I think I have a good solution for to fit properly. on the ends of the 1000 swinger There is already bushings. if I can find someone to make thicker bushings so I can use my stock katana pivot axle then the fitment should be perfect. But my question is do any you guys know someone who could machine thicker bushings same outer diameter size of the existing bushing on the gsxr 1000. and the inner diameter of the bushing will be machined to the size of the outer diameter of the GSX 600 F . thanks guys for any reply
 

·
Blood,Sweat N Beers
Joined
·
897 Posts
Discussion Starter · #3 ·
Re: gsx600f figment of 06 gsxr 1000 swinger.

Awesome. Yea ill get some measurements. That would be cats ass if someone could
 

·
Blood,Sweat N Beers
Joined
·
897 Posts
Discussion Starter · #4 ·
Re: gsx600f figment of 06 gsxr 1000 swinger.

. I need 2 of these bushings made if anyone can please let me kno thanks guys
 
1 - 5 of 5 Posts
Top