Custom Fighters - Custom Streetfighter Motorcycle Forum banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
1,236 Posts
Discussion Starter · #1 ·
Hello everyone. I zm looking at a set of forks from a 1995 gsxr 750. I have a wheel and brake discs from sn SRAD (TL1000) the forks are free (I work at a bike scrap shop, we sell used parts) they will fit srad trees but I noticed the brakes and wheel are different, offset, where my tl brakes are straight. We don't have a gen4 wheel in stock or I would just measure it. Is the center hub narrower on the gen4 than the srad wheel? If someone could measure the brake mount surface on one that would be awesome. The fork swap matrix only shows SRAD and newer someone should make one including the older gens too for us poor guys lol. Thanks in advance !

Sent from Motorcycle.com Free App
 

·
Lazy bastard
Joined
·
1,116 Posts
Our Savage has a SRAD forks and trees with an old school wheel (don't know the year), and the brake discs line up just fine. The center on the old wheel is indeed narrower than SRAD's. SRAD discs are 10 mm bigger, so some filing of the calipers might be needed, but no big deal.
 
1 - 7 of 7 Posts
Top