Hey guys just picked up a MT03 headlight for my 2002 f4i and am clueless on electrical workings. If anyone has past experience with setting this up please let me know. Btw sorry if this has been asked many times.. i couldnt find a thread on it. Also pics are greatly appreciated. Thanks
Headlight Wiring
1 - 4 of 4 Posts
Joined
·
1,466 Posts
Have you checked what setup your current headlight has? What bulb does it use? (If you don't know, take a pic
for us) There should be 3 wires going into your headlight's main bulb + 2 wires for the park light. Are there plug sockets
or are the connections wire-to-wire?
Same goes for the MT03 headlight (wiring part, not the bulb)
When asking for help, provide as much info as possible - if you don't know what you're dealing with, even simple pictures
will go a long way with some guys here. Help us help you
for us) There should be 3 wires going into your headlight's main bulb + 2 wires for the park light. Are there plug sockets
or are the connections wire-to-wire?
Same goes for the MT03 headlight (wiring part, not the bulb)
When asking for help, provide as much info as possible - if you don't know what you're dealing with, even simple pictures
will go a long way with some guys here. Help us help you
My current set up is 100% stock. I would like to be able to keep the whole (original) headlight assembly together in case I need to sell it. Basically what I have that goes to the headlight assembly is just the gray connector with the wires to the headlights and tip over sensor, also the two connectors for the speedo.
Tried uploading a pic but said file was too large.
Tried uploading a pic but said file was too large.
1 - 4 of 4 Posts
Join the discussion
