[DougZ]

Anyone have any....cheap?

 

[DougZ]

Actually...anyone got any Buell XB trees for me?

 

[fslflint]

WWEEELLLLL. I have a set of billet tripples that I never finnished. I coppied the geometry from an 02 gsxr 750. the lower one would work for yah. but I would have to make a different top one

 

[DougZ]

WWEEELLLLL. I have a set of billet tripples that I never finnished. I coppied the geometry from an 02 gsxr 750. the lower one would work for yah. but I would have to make a different top one

Get some pics up and PM me some pricing. arty-smiley:

 

[DougZ]

I still need these tripples. 01-03 750 tripples for USD forks...50 mm top, 54 mm bottom.

I do have, which I though would work, a set of mint 06 600 triples. PM me an offer on those. I can get up pics if needed.

 

[sanitys]

doug why wont the 06 ones work? I have 06's on my 02 600, granted my original forks werent USD, just curious why the tripples dont work.

 

[DougZ]

doug why wont the 06 ones work? I have 06's on my 02 600, granted my original forks werent USD, just curious why the tripples dont work.

Cause I suck and assumed that all Zuki's that have a 50mm top, have a 54 mm bottom...which is not the case. The 600's have a ~52mm bottom. No matter how hard I tried, I could not pry it open enough to get the other tubes in there. I had though about milling it out, but there is just not that material in there.

 

[sanitys]

I know Im bringing this back from the dead, but I can confirm 06 600 forks do indeed have 54mm bottoms, as I have 54 mm clamp mounts just above the lower triple holding on the headlights.

Edit...Atleast I think its a 600 front end...let me double check my ebay history before I give you false info. Well I cant even see the auction title anymore (more than 60 days) almost positive its a 600 front tho.

Edit again, apparently the 60 day thing keeps a link via paypal ( man i got a smoking deal ) The best thing, direct swap, using a 02 600 wheel, just need caliper spacers for the larger rotors (or use stacked washers)

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190108419352

 

[DougZ]

Maybe I got an odd labeled set, but these were definitely 52 mm at the bottoms...I measured 15 different ways, and no matter what, could not get them to fit. I then got a set, of 03 1K's, IIRC, and they fit right away, with a measured bottom of 54 mm.

Either way, I got a sweet set up ready to bolt on.

 

[sanitys]

Maybe I got an odd labeled set, but these were definitely 52 mm at the bottoms...I measured 15 different ways, and no matter what, could not get them to fit. I then got a set, of 03 1K's, IIRC, and they fit right away, with a measured bottom of 54 mm.

Either way, I got a sweet set up ready to bolt on.

good to see you got it figured out.