Mirrors

1196 Views 4 Replies 4 Participants Last post by 929_adam, Oct 23, 2006

McBain

Discussion Starter · Oct 20, 2006

Does anyone know where I can find some bar end mirrors that can be mounted using the 6mm bolt for the bar ends? I'm hoping to find some that are small (2"), round, and black. I have found many like this (although most are 3"), but they have a mounting mechanism that spreads as you turn its screw. This is no good unless I totally drill out my bars. Also, all of the ads say that they could clamp around standard 7/8" bars; I measured mine with a verneer caliper, and they are just a hair shy of 1" (far from 7/8"). Are they talking about inside diameter? Even if the clamps do fit around my bars, there is NO space to move the grip and controls in at all on the left side. My stock bar ends are much wider than the bars, too. Anyone have any ideas?

Save

1 - 1 of 5 Posts

Bad Habit

· #4 · Oct 21, 2006

I've got the CRG on my left side, too. I thought they sold the threaded adapter to thread it in if you wanted too. here is a pic of mine. My bar end is too big so I have it rotated rearward some, which limits steering to the left just a bit. But until I buy new bar ends, that's the way it's gotta be.

See less See more

Save

1 - 1 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month