Custom Fighters - Custom Streetfighter Motorcycle Forum banner

Petcock Adapter Plate

539 views 9 replies 6 participants last post by  Smoker 
#1 ·
I need a petcock adapter plate for a high-flow petcock.

A simple spacer, but with 3/8" NPT threads in one hole.

The original adapter plate from Pingel is stainless and heavy. I'd like to try 6061 aluminum, but 7075 might be better, if available.

The aluminum adapter plate needs to be 6mm thicker/taller (to lower the petcock knob).

If anyone can make this part, I can post dimensions - or send you the stainless adapter.





 
See less See more
3
#2 ·
It needs to be 6mm thicker, but how thick is it now?

I'm ordering a 3/8" NPT tonight for a project of my own. So I'll have that and , depending on your total thickness you need, I might have a order of stock that will work, too.

BUT, I don't have a mill, so it would sawn and sanded. Probably not the finished product yore looking for.

Also, the two mounting holes, do they have to be like they are now? With the little step in them, or can that be a full hole drilled all the way through?
 
You have insufficient privileges to reply here.
Top