Custom Fighters - Custom Streetfighter Motorcycle Forum banner
1 - 20 of 30 Posts

·
Administrator
Joined
·
5,264 Posts
Discussion Starter · #1 ·
Sooooo, i figured that since i am currently in possession of one of each of the 4 main SSSAs that it was basically my duty to put together some measurements for the good of all ‘Fighterdom.
Here’s what i did:

Triumph 995: http://www.customfighters.com/forums/showpost.php?p=1256268&postcount=2
Ducati 996 (916): http://www.customfighters.com/forums/showpost.php?p=1256269&postcount=3
VFR800 Vtec & Pre Vtec: http://www.customfighters.com/forums/showpost.php?p=1256270&postcount=4
VFR750 1990–1993 - VFR750FL/M/N/P (RC36): http://www.customfighters.com/forums/showpost.php?p=1256270&postcount=5

Single Sided Swingarm Measurement Madness! :D
 

·
Administrator
Joined
·
5,264 Posts
Discussion Starter · #8 ·
Cheers guys, BTW, Mike(Gyver) kindly offered to measure his 916 arm for this thread when i was planning it but i accidently bought a Duc arm myself, so be sure to chuck some rep his way for the good intentions! (Really i think i just wanted to not have him distracted from finally finishing that beauty of a tail he was fabbing up for his build :D)

I've noticed some of the text is a little blurred, i might fiddle around with some sizes to see if i can fix that and update photos. - Done
 

·
Administrator
Joined
·
5,264 Posts
Discussion Starter · #14 ·
i have a triumph 1050 arm.. would it be helpful if i added that?
Yeah, go for it! But i think that the 1050 arm is very similar to or identical to that 955 arm i measured, so maybe check the measurements against your arm. If it's the same i'll update the description to include 1050. If not, maybe either copy my layout exactly yourself or take pics and send them to me to photoshop up so that they all visually the same and are easily cross-referenced.

You've got a typo in your 996 shock linkage pic. The 12.5mm in the top left. Can you replace that with the dimensions to each hole so people can figure out the linkage ratio in addition to knowing the overall length?
Fixed, good spot. 125MM not 12.5MM! :doh:

Hole - to middle - to hole added.
 

·
Administrator
Joined
·
5,264 Posts
Discussion Starter · #16 ·

·
watches you sleep.
Joined
·
9,118 Posts
Cool, now its a sticky. If everyone could please keep this thread as clean as possible and don't post up with non useful information I would really appreciate it. It's helps when people search threads like this to not have to sift through pages and pages of unnecessary posts. Thank you all for your cooperation.
 

·
Administrator
Joined
·
5,264 Posts
Discussion Starter · #19 ·
Whoot! Got a sticky on CF! Cheers Mark,


Cool, now its a sticky. If everyone could please keep this thread as clean as possible and don't post up with non useful information I would really appreciate it. It's helps when people search threads like this to not have to sift through pages and pages of unnecessary posts. Thank you all for your cooperation.
I can add a direct link to the others in my first post when new swingarm measurement pics are added like the NC30 etc.
 
1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top