Custom Fighters - Custom Streetfighter Motorcycle Forum banner
1 - 1 of 1 Posts

·
Bitches love Fighters
Joined
·
5,325 Posts
you can measure from center of swingarm pivot to center of axle on both sides. take your time with it the first time and once you get it perfect put a little wrench between the sprocket and chain and roll it back so it tightens the chain and pulls the wheel forward a bit. tighten the axle down and let the wrench out. re measure everything and make sure it still good. then measure from the lip of the wheel to the swingarm and from then on out you can just use that measurement. get the chain to the proper tension and then adjust it until the wheel lip is that same distance from the swingarm.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top