Custom Fighters - Custom Streetfighter Motorcycle Forum banner
1 - 3 of 3 Posts

·
Fighterering since 1998
Joined
·
1,204 Posts
Discussion Starter · #1 ·
anyone ever pressed out a steering stem and pressed one in without a machine shop? I have to do this with my steering stem and put it into my gsxr usd stem space, but need to make a collar/sleeve for it as well...
 

·
Registered
Joined
·
40 Posts
yeah i pressed out a zx12r stem and pressed in my zx9r stem into the 12r bottom yoke. Did this to fit the 12r usd forks.
I did use a 10 ton hydraulic press that i have in the shed/workshop.
Remember to check which way to press the stem out.
Most stems will press out downwards through the yoke as they normally have circlips or shoulders at the base of the stem.
 
1 - 3 of 3 Posts
Top