Custom Fighters - Custom Streetfighter Motorcycle Forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
Does anyone has a sugestion on which mirrors could be used on a TLS streetfighter with MC bars?
I don't have a clue what to use so any sugestion or picture would be appreciated.
 

·
Function IS Form
19 Z900, 88 Kat11
Joined
·
17,434 Posts
EMGO makes a set of cheap mirrors that will go into the ends of your bars.

Otherwise, there are a million different kinds of bar-end mirrors for you to peruse.. just search the internet for them. The hard part would be finding somewhere that can ship to Panama.
All the stores I know of only do US orders.

The key words being 'bar end mirror'
 

·
Function IS Form
19 Z900, 88 Kat11
Joined
·
17,434 Posts
Any mirror the clamps to the bar will work. Search catalogues full of motorcycles mirrors. Harley places are actually pretty good for this. You just have to match the diameter of your bar to the mirror.
 

·
Eff Tee Pee
Joined
·
29,647 Posts

·
The Soft Serve Enigma
Joined
·
16,719 Posts
Another thing you can do is get threaded adaptors that bolt onto the bars, then you can put on whatever mirrors you want.
 

·
Function IS Form
19 Z900, 88 Kat11
Joined
·
17,434 Posts


The clip-ons on my Hayabusa have plastic plugs that the bar ends screw into, so I just used the screw for the bar-ends and screwed the EMGO's on.
Loc-tite is important for that, though.

Anyway, that's how the EMGO square ones look on a bike.
 

·
Function IS Form
19 Z900, 88 Kat11
Joined
·
17,434 Posts
The flicky thing they do. Um. If you push them they come back out on their own without losing adjustment. The CRG Lanesplitters.
 

·
hack
Joined
·
729 Posts
the lane splitters are $80 apiece. the flicky thing is nice, but if you drop your bike on them they still get scratched. I doubt you can replace anything on the CRG for less than $30 (the cost of this entire mirror). CRG also sells a mirror exactly like this (the blindsight) but those are $60 apiece
 

·
_____________________
Joined
·
1,365 Posts
CRG bar-end lane splitters are a classy piece of kit (they are made out of solid aluminium billets) and the lenses are optically ground to give the best rear view for the relatively small diameter, unlike some that give image distortion or the appearance that the, ahem..flashing red lights behind you are closer than you think. Aso, rather than using the expanding end plugs you can mount them inboard of your bar weights to give an added bit of protection.
This is why they cost that bit more but I like 'em thats why I use 'em.
 
1 - 17 of 17 Posts
Top