08 Ninja 650r turned streetfighter

Jetcrazy14 · Apr 16, 2012

So about a year ago I picked up a 650r.

Then:

And then...

I've already got plans for it this summer and I'm sure new ideas will pop up with time. I'll keep updated this as I go. Feedback appreciated.

Mr-Show · Apr 16, 2012

I like that little bike! good work!

Caleb-M · Apr 16, 2012

The bike looks good man but i'd throw a wind screen on for a more finished look myself. Something like this

Jetcrazy14 · Apr 19, 2012

I've actually been thinking about that as well as a belly pan. I'm gonna try to cut the stock lower fairing and use it as a belly pan. I'm also gonna try to make my own wind screen using fiberglass that will look good with those big 5 3/4in lights. I don't really want to spend the $100 or more for a premade one.

drod · Apr 25, 2012

Thought about sheet metal at all? If your looking for a simple dseign like the picture above its only a matter of cutting the shape and bending to place!
just a thought :thumbup:

Jetcrazy14 · Apr 28, 2012

I've thought about it, and have some tools for working with it at school but not back at home. Plus I think I'm gonna be able to get the shape I want better/easier with fiber glass. We'll see how it goes. I'm still not entirely sure on the exact design I want yet.

Jetcrazy14 · Aug 7, 2012

Update:

So a couple weeks ago I decided to dig up my old windshield and bust out the dremel. Some cutting, sanding, and a few adel clamps later... this was the result. I will eventually paint it to match the bike.

I also finally decided to do something about the stock coolant reservoir.

I am currently in the process of redoing the wheels. Just finished stripping them today, Should have them finished in the next couple days. Pics to come.

CtotheQ · Aug 8, 2012

screen looks good

Zippinthru · Aug 9, 2012

Looks good. I like the stripes

Jetcrazy14 · Aug 12, 2012

Thanks guys. Finished the wheels a couple days ago. Got tires on and everything reinstalled yesterday. Bike feels so much better with new tires, chain, and sprockets.

F'dup · Aug 12, 2012

Cool bike man, screen came out real good!

Jetcrazy14 · Dec 29, 2012

Home from school for a couple weeks so I decided to bust out the tools and grinder and get this thing ready for paint. Got the headlights and gauges off and cut the tail as well as a few fairing mount tabs.

Then it was on to tracing, labeling, and removing the wiring harness and electrical system components as well as the exhaust and intake.

Got the engine dropped. Nothing planned for it unfortunately

Got the rest pulled apart and cut off some more tabs.

Easy part is done lol. Now on to a lot of stripping and sanding to get the frame, swingarm, tank, fender, and flyscreen ready for paint. Need to weld in some form of a plug on the subframe where I cut the tail off to keep the water out also.

CtotheQ · Dec 30, 2012

I found some plastic plugs at my local ace hardware store that along with some silicone sealant keeps out the water fine.

Jetcrazy14 · Dec 30, 2012

I'm just going to weld in a couple washers and grind it down smooth. I should get that done in the next couple days. I'll be sure to post pics.

CtotheQ · Dec 30, 2012

assuming your doing a new tail?

Jetcrazy14 · Dec 30, 2012

Kinda. Seeing your bike I realized how much I liked the tube subframe so I'm going to be leaving tail plastics off. I've already rigged up a taillight and bracket and will be cutting a few inches off the seat. I'll probably end up making a seat cowl for it as well.

CtotheQ · Dec 31, 2012

Nice, i was actually thinking about about trying to send my seat away to Rats brother to get it pimped out before i got the monster seat.

Jetcrazy14 · Jan 2, 2013

Got the washers welded on, filled, and ground down.

chevy42083 · Jan 2, 2013

Looking good. Any preview of the light you came up with?
I can't wait to see it all back together. I too have debated the tube rear, but think I'll stick with "bobbing" the stock plastics. I have the vision, just haven't acted on it yet.

Jetcrazy14 · Jan 4, 2013

I just went with a cheap oval ebay light. I failed to take pictures of it though. It's just mounted on a piece of aluminum that is bolted to that tab just behind the seat latch. Simple but gets the job done.

Jetcrazy14 · Jan 25, 2013

Got the tank paint stripped most of the way off. Got a little more work to do on it before I fill the dents in.

chevy42083 · Jan 25, 2013

Wet ground... you use stripper then hose it off? Or did it just happen to rain.

Glad you stripped it... I've been STRONGLY considering how to paint mine/wrap mine... and our bikes might have ended up way too similar (Same gen, red, same mirrors, stripe, stock gauges).

Jetcrazy14 · Jan 25, 2013

Both. Hosed it off after, then it rained right as I finished. But ya, the red is gone, as is the stripe. I have different mirrors as well now so no worries lol

killrob · Jan 25, 2013

Bikes looking good! Gotta love how you started the thread with a fly screen and now the engines out!

Jetcrazy14 · Jan 26, 2013

Lol. Ya, I never thought I'd have it at this point so soon. I figured some day when I had my own garage I would tear it down and whatnot, then over break cut off some tabs and next thing I know it's in pieces.

Problomatic · Jan 26, 2013

Haha, awesome man. Love to see what you do with the tail chop.

Jetcrazy14 · Feb 8, 2013

I don't have it drilled and mounted yet but I got the subframe plate cut/bent to shape today after class.

08 Ninja 650r turned streetfighter

Top Contributors this Month

Recommended Communities