SRAD750 yokes will drop straight into the SRAD600 headstock, the TL1000 yokes will also fit, all are 214mm centres. GSXR1000K1 to K6 and GSXR750Y to K5 and GSXR600K4/5 will also fit.

The 750SRAD forks should fit the TL yokes but the K series yokes are 50/54 and 207mm centres

 

The 750SRAD forks should fit the TL yokes but the K series yokes are 50/54 and 207mm centres[/QUOTE]

Cheers for the reply. Whats the 54 measurement? Im guessing the 50 is the diameter of the 750 forks and 207 is the distance apart of the fork holes in the TL yokes. Whats the 54>?

 

Only one TL top yoke on ebay and its expensive! aah!

 

K series forks are 50mm at the top yoke and 54mm at the bottom yoke. SRAD forks are a different measurement top and bottom. K series fork centres are 207mm apart whereas the SRAD fork centres are 214mm apart as are the TL forks. the stem will fit the headstocks of SRAD, TL, K series and slingshots and slabbies with a bearing swap on the top.

 

what parts do you already have?

 

I've got the bottom yoke and the 750 forks! Still no luck finding a top yoke. Well there's one going for 30 delivered. Thought that was still too expensive!

 

30 delivered doesnt sound bad at all

 

£30 delivered is about right for a standard top yoke. if you get a top yoke conversion from LSL or ABM etc it will cost you around £150.

 

I'm turning my SRAD into a streetfighter, and would like the riser bars, anybody know of, or can suggest options that'll fit my 750 forks?

Failing that, I take it ill also need the 750 clip ons to fit the 750 forks and can't use my 600 clip ons?

 

Unless of course I can't find suitable risers, would my 600 clip-ons fit the 750 forks or would I need to get 750 clip-ons too?!

 

600SRAD forks are 46mm diameter stanchions RWU forks, whereas the 750SRAD uses USD forks which are a larger diameter. Why not just get some risers and have them welded onto the 750 upper yoke? It saves fuckin' around drilling the yoke and avoiding the webs underneath etc, and is planty strong enough.

 

I can't get them welded on as I don't know anyone who could do that and surely it'll cost just as much as getting some clip ons? Will the TL 1000R clip ons fit the 750 forks?

 

The tl clips will work

 

Actually any clip ons from inverted gsxr forks will work

 

GSXR1100 clip ons are 52mm at the clamp, rather than 50mm of the 750 Slingy forks and later forks

 

Well I bought the TL top yoke and got it today. It doesn't fit. The yoke is 214 whereas my forks are 207mm. Which means which yoke do I need now?

 

A little late, but I hope it still helps

 

That is helpful thanks. After buying the wrong yoke I was guna pay the £30 for that 97 750 SRAD yoke but seeing your chart made me realise it wouldn't fit anyways! Am now looking for alternative ones on eBay.

 

If your lower yoke is measuring 207mm fork centres then you have a K series yoke, which will be either 32mm, 30mm or 28mm offset. Post a picture of the forks and yokes you have, and I should be able to identify them.

 

Thanks that'll be very helpfull.

Pictures are below. Also one of them shows the TL top yoke and how it doesnt fit. Im pretty sure I have a set of k forks, probably k1?! Unsure by what you mean by offset so please advise on which top yokes would fit from the table below. Am currently watching a GSXR 1000 k2 top yoke on ebay but waiting to hear the measurements from the seller to confirm theyd fit.

Thanks guys!

 

It looks like early 750K series bottom yoke

 

Still not got a top yoke. According to seller on eBay his 1000k2 has holes 157mm apart so that wont fit! Thought it would looking at table above!?

 

Seeing as though none of the top yokes above have worked, can someone please tell me any top yokes that WILL fit my bike beside the 750 SRAD?

 

How much do you want for that TL top yoke?


Sent from my iPhone using MO Free

 

Sorry already sold! Still looking for a top yoke though!